Sie sind nicht angemeldet.

Suchergebnisse

Suchergebnisse 1-20 von insgesamt 1 000. Es gibt noch weitere Suchergebnisse, bitte verfeinern Sie Ihre Suche.

Guten Tag lieber Gast, um »40k-fanworld« vollständig mit allen Funktionen nutzen zu können, sollten Sie sich erst registrieren.
Benutzen Sie bitte dafür das Registrierungsformular, um sich zu registrieren. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

14.11.2018, 19:35

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Cultivating Ennui: Once again in spite of the amount of work involved the results are far from breathtaking and I wonder while making up these interim updates that the results are boring to my readers. https://i.imgur.com/Vw4X6OW.jpg Suffice it to say I am pleased how this is coming out https://i.imgur.com/B1XklYw.jpg Even in it's rough state with only one barrel mounted the Hellstorm Cannon gives the impression of raw power https://i.imgur.com/joc4Pzl.jpg And will be a worthy companion to the P...

12.11.2018, 21:34

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Sleeves: I tried to find a cement compatible with both styrene and PVC to no avail so I opted to sheath the PVC tubing with 0.020 inch (0,5MM) sheet styrene so to make adhering detail easier later on. https://i.imgur.com/mOfBr6J.jpg With a bit of care it's rather easy to do this and although each barrel has six section the seams will be neigh on invisible once sanded and painted. What this world needs is a universal plastic cement and I don't mean Cyanoacetate glue.

07.11.2018, 21:21

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Much Better: A hasty trip to HoDeDoe this morning and my wallet a few bucks lighter bu I feel much better about the diameter of the Hellstorm cannon which incidentally does not fire projectiles so what with the six barrels??? Do they fire all at once? Do they really need to rotate? Can I get away with only 5 tubes? https://i.imgur.com/H9SzXFx.jpg I can understand the Gatling gun rotating but an energy weapon uh uh? https://i.imgur.com/eCQjUjO.jpg So advise me of my error

06.11.2018, 21:43

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Too Small: Went to Home Depot today and bought some PVC tubing for the gin barrels. The problem is the diameters are too small compared to the Plasma Blaster so I need to go back tomorrow and by 2 more pieces of the mid-sized tubing. fortunately the stuff is dirt cheap https://i.imgur.com/dZPmYeU.jpg Once I get the material I'm going to sheath it with styrene so stuff can be glued to it. https://i.imgur.com/1PVXP36.jpg That's all for today, Cheers!

05.11.2018, 16:44

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Hellstorm Cannon: Okay it's decided, I'm going to make a Hellstorm Cannon although not this massive where the Titan is seen looming behind an Alpine size mountain range. https://i.imgur.com/10kf0vn.jpg The tiny white gangway and access door bespeak a ludicrous to the extreme order of magnitude for this weapon let alone the Titan itself but there are details that attracted me to the project including the drum mount which goes along with what I have already built for the Gatling gun. I shall also ...

03.11.2018, 19:23

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

House of Cards: It's about time to start fastening things together. Relying on friction won't cut it anymore as what is imaged here weighs about 30 lbs (14 Kilo) https://i.imgur.com/NFOQRbS.jpg With the 8 lbs of Plasma Blaster this thing is too unwieldy to to leave on the display stand in it's complete form and I took a chance on photoing it even in it's incomplete state. I'm no slouch when it comes to weight lifting but it took some heft to deadlift it off the stand in one piece. https://i.imgu...

27.10.2018, 16:17

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Reverse Engineering: Sometimes it pays to be pigheaded such as my obsessive insistence to retain the beautiful shoulder yoke so ably represented in Mr Joazzz2's 3D masterpieces of elegant Emperor Titans. The other example of my OCD is to attempt to meld that yoke with the equally elegant mounting drums of the Forge World Alpha Warlord. https://i.imgur.com/VIZTmxK.jpg Both designs are mutually exclusive as the Forge World shoulders are deeply ensconced under the shoulder carapace and the trunnion...

15.10.2018, 21:49

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

A View From A Height: It's no secret I'm just a copier; none of this stuff is original with me. I prefer to think of myself as viewing from a height; picking and choosing that which I think would go best on my models and adapting the modifications to make them work with the rest of the components. Such is the case with the gun mounts on the Arms yoke I copied from Joazzz2 outstanding 3D masterpiece Emperor Titan. seen below: https://i.imgur.com/jlKKwDk.jpg I thought the yoke was a unique way to ...

13.10.2018, 13:48

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Cloaca: At the charging end of the Plasma Blaster is this cylindrical structure that is somewhat convex and fortunately I had a piece of recyclable styrene of adequate size that had a flattened dome shape. It was a simple matter to divide it into twelfths but somewhat more difficult to space out the segments https://i.imgur.com/Nq1rhzh.jpg I want to keep the structure as hollow as possible so I can add balancing weight so once I get the end cap detailed I'll make the rest of the cylinder. https:...

08.10.2018, 21:21

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Consider Me Crazy: If someone had told me that it would take me all Summer and then some to make this Annihilator Plasma Blaster I would have considered him crazy. https://i.imgur.com/huG26nX.jpg After all I build a Warlord Titan in less than two years and it took about two weeks to make the main Volcano Cannons for that Titan...... https://i.imgur.com/kW0FlHB.jpg So anyway I've decided to make this weapon modular https://i.imgur.com/MkkbQDj.jpg Here we see the four basic components https://i.im...

06.10.2018, 11:56

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Plasma Blaster Reactor: Or whatever it is will serve as the counterweight for this monster of a gun. https://i.imgur.com/SEj3WO1.jpg Once I finish the basic detail I'll be putting about ten ounces of weight in the rear compartment. https://i.imgur.com/Ru9zoyb.jpg

28.09.2018, 01:21

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

When Will There Be An End? I am so sick of this weapon. It's like pushing a snowball uphill. The bigger it gets the harder it is to push it further... https://i.imgur.com/67h9Z7P.jpg My only consolation is; the rest of the weapons will be a piece of cake in comparison...... https://i.imgur.com/6wvPzCp.jpg The reactor core is almost complete, I need only add 13 more silver coils and the rest will be eyewash..... https://i.imgur.com/ZY6Yr3Z.jpg Last night I built the obverse side and am about read...

21.09.2018, 19:01

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Just a Quick One Today: Working on the reactor coil (whatever) It's a complex piece of machinery with a lot of delicate parts. The Plastic cement eats through the curved 0.040 inch square stock instantly so I had to use 0.5 inch tubing for the ends of the slots. https://i.imgur.com/IBhq3II.jpg It seems to work okay.

18.09.2018, 21:38

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

That's About the Size of It: I finally can appreciate the size of this construct and I am revisiting my anxiety over the scale Vis-à-vis the actual Titan. https://i.imgur.com/XLL36Aw.jpg https://i.imgur.com/990xV1i.jpg https://i.imgur.com/vchVYlh.jpg https://i.imgur.com/KNciCjg.jpg https://i.imgur.com/htf5EPr.jpg It seems about right................

18.09.2018, 00:12

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Cochlear Implant: I'm frequently asked how I develop a construction from just images on a computer screen. and I suppose this is a prime demonstration candidate. the Cochlear shaped reactor core at the back end of the Plasma Blaster. Since I already had the disc mount assembly it was a simple matter of transporting the dimensions off the disc to the rectangular grid material and eyeballing the divisions on the screen I used my compass to define where the concentric components would be arranged. ...

16.09.2018, 18:44

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

One Week Later: It's been a busy week but I managed to fit in a bit of building. The biggest accomplishment is a second Arms Mount section for the other armament items. https://i.imgur.com/9yj9h3H.jpg It is a source of irritation to me that each of these disc mount appendages seem dedicated to a particular weapon so hopefully I can circumvent this need for redundancy by making a generic disc and adding a discrete weapons module pack for each weapon I produce. The Discs are really time consuming ...

08.09.2018, 14:32

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Weekend Update: I had hoped to be further along in the rear mechanisms by now but I ran into a bit of a snag when I realized the the rear section of the weapon expanded further than the surface armour surrounding the mount disk. Since my gun is wider overall than the Warlord weapon I have decided to not expand this section unless I see the overall appeal of the Plasma Blaster is compromised. https://i.imgur.com/opWDHf4.jpg Another modification is the rear mount must also be removable and be able...

05.09.2018, 13:45

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Time to Take Stock: I've reached a point where I need to economize on the number of components to duplicate and for the past week I've been thinking of a way to save work on making redundant items and I believe I have come up with a way. https://i.imgur.com/ZeUtl3H.jpg The suspender arm disc was labor intensive especially if I have to make one for each weapon variant so below is a removable Mount Disc Component that I will be making for each of the two weapon arms which will facilitate rapid exc...

02.09.2018, 00:11

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

It's been said that the only reason that people go to Cockroach Races is to see a Cockroach crash. By extension; the only reason people view my threads is to see me Frak up. https://i.imgur.com/ZLZmcDD.jpg Well sorry to disappoint but it ain't gonna happen this day. Today is the first time I have aligned and imaged my Imperator and the never ending Plasma Blaster project together...... https://i.imgur.com/6msMmTC.jpg ( Honest to the God Emperor ) https://i.imgur.com/pBXee9X.jpg and it seems to b...

01.09.2018, 01:12

Forenbeitrag von: »Blackadderz«

Blackadder Attempts to build an Imperial Warmonger Titan

Getting There: What else can I say? https://i.imgur.com/jbx20fT.jpg This is a labor intensive project........... https://i.imgur.com/WR4APDH.jpg